товары для работы с грузом

Отправить заявку Позвонить нам

Solid Thimble

Material	Malleable cast iron
Standard	BS 464 — table 3 — 1958
Finish	Self colour — hot dipped galvanised available, prices on request. Also, prices for drilled and/or machined finish are available on request
Notes	As standard the castings are supplied unmachined, for the BS464 standard to apply, thimbles require machining both sides. * Dimension shown C — width outside is the finished size after machining both sides and not the size of the casting offered as standard. ** The maximum pin hole size permitted in the standard

Diameter Rope	Width Overall	Width Outside	Width Inside	Length Overall	Maximum Hole Permitted	Product Code	Weight Each
a inch	b inch	c inch *	d inch	e inch	**	kg
5/16	1.3/8	7/16	1	1.7/8	1/2	44001	0.09
3/8	1.3/4	9/16	1.1/4	2.1/4	5/8	44002	0.17
7/16	2.1/16	11/16	1.1/2	2.3/4	3/4	44003	0.30
1/2	2.3/8	13/16	1.3/4	3.1/4	7/8	44004	0.42
5/8	2.3/4	7/8	2	3.3/4	1	44005	0.54
3/4	3.3/8	1.1/8	2.1/2	4.5/8	1.1/4	44006	1.19
7/8	3.3/4	1.1/4	2.3/4	5	1.3/8	44007	1.72
15/16	4.1/8	1.5/16	3	5.1/2	1.1/2	44008	2.13
1	4.1/2	1.7/16	3.1/4	6	1.5/8	44009	2.57
1.1/8	4.7/8	1.9/16	3.1/2	6.1/2	1.3/4	44010	3.06
1.1/4	5.1/2	1.3/4	4	7.1/2	2	44011	4.52
1.3/8	6.1/8	2	4.1/2	8.1/4	2.1/4	44012	6.51
1.1/2	6.3/4	2.1/4	5	9.1/4	2.1/2	44.13	9.20

[contact-form-7 id="5125" title="Контактная форма 1"]

Ознакомьтесь с политикой по обработке персональных данных, согласием на обработку персональных данных и пользовательским соглашением, нажав здесь (откроется в новой вкладке).